CTS 'TVT' Pots

 

A good set of pickups can make an average guitar incredible, and an incredible guitar...

phenomenal...if your guitar sounds good unplugged, it can be a tone monster with the right electronics!

also another important part is the guitar pot......we have ordered CTS pots that are build to our specs.....read more!

Features like the old Vintage pots, rigth earbelonging right curve of 30%, Tolerance under 10%, Bakelite Baseplate, Smooth action!
Low turning torque = easier to turn! NOW with SOLID BRASS Shaft and THREAD!!!!

***NOTE*** These ultimate custom audio taper gives smooth even response throughout the range of motion

NEW SPEC FOR 500k POTS

We work hard to make you parts better and better....so here is the New Version of our Famous "TVT" Pots

- Anti-static lube assures reliable, glitch-free operation
- better Solderable cover means no-hassle grounding to the pot's body
- Lower Turning Tourque (Smooth Soft)
- More correct Curve...we make small change to more Vintage org. Curve!!!
CTS "True Vintage Taper" (TVT) if you looking for the best pots available at the market your search ends here!
These org. CTS pots are custombuilt to for us...

CLICK HERE FOR CURRENCY CONVERTER

CTS 'TVT' Custom 250K Short Split Shaft

£7.90 each

 

 

CTS 'TVT' Custom 250K Solid Shaft

These Pots are Custom made to our specs by CTS

£7.90 each

 

 

 

CTS 'TVT' Custom 500K Short shaft

These log. Pots are Custom made to specs by CTS.Features like the old Vintage pots, rigth earbelonging right curve of 30%, Tolerance under 10%, Bakelite Baseplate, Smooth action!
Low turning torque = easier to turn!

£7.90 each

 

 

 

 

CTS 'TVT' Custom 500K Longshaft

These log. Pots are Custom made to specs by CTS. Features like the old Vintage pots, rigth earbelonging right curve of 30%, Tolerance under 5%, Bakelite Baseplate, Smooth action! Low turning torque = easier to turn! ***NOTE*** These ultimate custom audio taper gives smooth even response throughout the range of motion 30% -RoHS Conform

£10.90 each

 

 


CTS
'TVT' -500K Custom Calibrated Set

Calibrated set under 3% tolerance in matched set.

£32.90 set

 


 

CTS 'TVT' -250K Custom Calibrated Set

Calibrated set of 3 CTS 250K Pots, tolerance under 3% in matched set.

£23.90 set

 

 

 

CTS 'TVT' -500K Longshaft Calibrated Set

Set of 4 Calibrated 500 K Longshaft pots, under 3% tolerance in matched set.

£41.90 set

 

 


CTS Blender Pot

Much like the Fender "No Load" pot the CTS Blender pot acts as a true bypass when rotated between 9 and 10. The main difference from the "No Load" is that the Mojo Blender pot has the dished back and there is no click feel between 9 and 10. The Mojo Blender pot is best used for true bypass tone control or Blender wiring.

£8.95

 

 

 

 

Prewired Kits >

* Gibson® and Les Paul® are registered trademarks of GMI International. Fender®, Strat®, Stratocaster®, Relic®, Tele®, and Telecaster® are registered trademarks of Fender Musical Instruments Corp. Kluson is a registered trademark of W.D. Music Inc . Croxguitars are in no way affilated with these companies in any way. We use the names to show which parts are suitable for use with specific guitars. Parts offered are for restoration or upgrade of OEM guitars only. See our terms & conditions for full disclaimer.

 

About Us | Terms & Conditions | Privacy Policy | Contact Us | ©2015 Croxguitars all rights reserved