MOJO Prewired Harnesses

While many people rightly feel that the best way to improve the tone of their guitar is to upgrade their pickups, they will often ignore the other parts in the circuit - the pots, switches, jack sockets and wire itself - either because they are worried by the idea of soldering, or because they are concerned about the cost. And whilst we understand both view points, it is a little like putting a new engine in your Formula One car, but using the gearbox out of an Austin Allegro. It might work, but you are certain to lose a lot of the benefits.

In our experience, changing the pots to professional quality CTS, switches to Switchcraft or Oak Grigsby ones, and using good quality wires and other components, not only eliminates extraneous noises and clicks, but makes controls more responsive and generally removes some of the cotton wool from your sound. They will also last for years with normal use, so no nasty surprises when you are playing live. We think that if you are going to take the time to get top quality pickups, why would you make them less effective just to save a few bob?

At Mojo we are pleased to be able to provide you with complete or partial wiring looms that will bring the absolute best out of your new pickups and give your guitar a trouble-free and worry-less lifetime of performance.

There are hundreds of variations on guitar wiring schemes, and so we will obviously work with you to determine the best for you and your guitar, but some classic ones spring to mind, which we've outlined here to help you choose.

CLICK HERE FOR CURRENCY CONVERTER

3 Way Classic Strat

  • 250K Split Shaft CTS TVT Pots (True Vintage Taper)
  • 3 Way Oak Grigsby Switch
  • 0.047uf Paper In Oil Capacitor (Other options available)
  • Switchcraft Jack
  • Cloth Covered Hookup Wire
  • Mounted on harness board

£55.00

 

5 Way Classic Strat

  • 250K Split Shaft CTS TVT Pots (True Vintage Taper)
  • 5 Way Oak Grigsby Switch
  • 0.047uf Paper In Oil Capacitor (Other options available)
  • Switchcraft Jack
  • Cloth Covered Hookup Wire
  • Mounted on harness board

£55.00

 

 

3 Way Classic Tele

  • 250K Solid Shaft CTS TVT Pots (True Vintage Taper)
  • 3 Way Oak Grigsby Switch
  • 0.047uf Paper In Oil Capacitor (Other options available)
  • Switchcraft Jack
  • Cloth Covered Hookup Wire
  • Mounted on harness board

£52.00

 

4 Way Classic Tele

  • 250K Solid Shaft CTS TVT Pots (True Vintage Taper)
  • 4 Way Oak Grigsby Switch
  • 0.047uf Paper In Oil Capacitor (Other options available)
  • Switchcraft Jack
  • Cloth Covered Hookup Wire
  • Mounted on harness board

£58.00

 

 

 

3 Way Classic Esquire

  • 250K Solid Shaft CTS TVT Pots (True Vintage Taper)
  • 3 Way Oak Grigsby Switch
  • 0.047uf Paper In Oil Capacitors (Other options available)
  • Switchcraft Jack
  • Cloth Covered Hookup Wire
  • Mounted on harness board

£58.00

 

JazzMaster Vintage Full Harness

  • 1 Meg Volume. 500K Tone Solid Shaft CTS TVT Pots Main Circuit
  • 1 Meg Volume. 500K Tone Pots Rhythm Circuit
  • Rhythm Circuit Bracket & Thubwheels
  • 0.022uf PIO Capacitor on Rythm Circuit
  • 0.033uf PIO Capacitor on Main Circuit
  • Switchcraft on/off Switch and Jack
  • Vintage Correct Colour Cloth Covered Hookup Wire

Please note that the Pickguard in the picture is not included and is only shown for layout purpose.

£85.00

 

Vintage Gibson Harnessess

 

* Gibson® and Les Paul® are registered trademarks of GMI International. Fender®, Strat®, Stratocaster®, Relic®, Tele®, and Telecaster® are registered trademarks of Fender Musical Instruments Corp. Kluson is a registered trademark of W.D. Music Inc . Croxguitars are in no way affilated with these companies in any way. We use the names to show which parts are suitable for use with specific guitars. Parts offered are for restoration or upgrade of OEM guitars only. See our terms & conditions for full disclaimer.

 

About Us | Terms & Conditions | Privacy Policy | Contact Us | ©2015 Croxguitars all rights reserved